0
products in your shopping cart
Total:   $0.00 details
There are no products in your shopping cart!
We hope it's not for long.

Visit the shop

Features of the Intrepid Tourer Handcycle

Robust stanchion frame made from aircraft grade cromoly & 6063 aluminum
Adjustable and contoured seatback and slung seatbase
Adjustable crank position
Fast Rolling 700c wheels
Adjustable Footrest position
Flag Mount
All standard bicycle components
Locking Parking brake
Self centering steering
Quick release center post for easy transfers

Wheelbase: 60in (152cm)
Width: 27.5in (69cm)
Seat base height from the ground: 10″ (25.4cm)
Weight: 35lbs (11.3kg) with standard components
Rider height: 4’5″ to 7′ (1m 35cm to 2m 13cm)
Wheel Camber: 4 degrees
Rider weight limit: <250lbs (110kg)  Note: upgrading to the Aerospoke front wheel is recomended for rider over 200lbs
Rider height:  The Handcycle will adjust to fit normally proportioned people from 4′ to 6’10” (122cm – 208cm)  For people under 5’5″ (165cm) you will need footrest adjuster clamps to extend the range of the footrest adjustment.  Please let us know this at the time of your order.

Handcycle Rim Brake

This handcycle is equipped with two independent brakes. This one operates on the rim and also serves as a parking brake

Handcycle centering spring

The Tourer handcycle comes equiped with a heavy duty elastomeric centering spring. It returns the steering to center and keeps the handcycle going straight.

Moulded and contoured seatback for handcycle

The contoured seatback and slung seat base are extremely comfortable and they provide plenty of support for all day riding.

Disc brake and hub

The Tourer handcycle comes equipped with a powerful disc brake. This provides enough force to stop in the toughest of conditions. Unlike a rim brake it is also effective when wet. The hub on the handcycle is a Shimano Deore 36 spoke hole. There are several options for different hubs, brakes and gears in our component choice section.

Shandard handcycle shifter arangement

Check out the different component levels to find out more about our different configurations. The standard setup for shifters on the Tourer is a pair of SRAM grip shifters on the center post as shown.

Handcycle crankset

The Tourer handcycle uses a standard bicycle 68mm bottom bracket shell. This allows us to fit virtually any crankset available in the bicycle industry. The standard setup comes equipped with a Shimano mountain triple crankset with 170mm crankarms. This in combination with a 7 speed cassette offers 21 widely spaced gears ranging from 18.6 to 100.3 Gear Inches The crankhandles come attached using 9/16 LH and RH standard pedal spindles.